These herbicide recommendations are made subject to the product being registered for that purpose under relevant legislation. It is the user's responsibility to check that registration or an off-label permit covers the proposed use. Always read the herbicide label.
If in doubt, visit the Australian Pesticides and Veterinary Medicines Authority (APVMA) website at www.apvma.gov.au
Only herbicides registered for use in pasture and non-cropping situations are listed in the following table. Care must be taken in using herbicides as non-target plants contacted may be harmed.
For recommendations in specific crops consult an agronomist.
Carefully consult the product label for specific directions regarding the use of wetting agents or adjuvants.
Waterways and wetlands
Be careful! Many herbicides can cause damage to waterways and wetlands. Check the herbicide label directions carefully before use near waterways and wetlands. For more information see Guidelines for Safe and Effective Herbicide Use Near Waterways
Herbicide Brands and Concentrations
Herbicides are referred to by the active chemical ingredient in the following table. The product trade names in this publication are supplied on the understanding that no preference between equivalent products is intended and that the inclusion of a product does not imply endorsement by DPIPWE over any other equivalent product from another manufacturer. Information on available brands containing the herbicide you require should be obtained from a reputable herbicide supplier or the APVMA website at www.apvma.gov.au
There may be a number of products with the same active ingredient some with alternate formulations (concentration) registered for control of a weed eg: Glyphosate 360 g/L, Glyphosate 450 g/L may be registered for use on the same weed. Alternate formulations such as these will have a different application rate. Always check the label.
Spot Spray Application
Stage of Growth
Example of commercial product (concentration of active ingredient)
Application rate of commercial product
|All stages, while plant is actively growing||*Metsulfuron-methyl ||Brush-Off®, Associate ®|
|1-1.5 g/10 L||nil||In accordance with APVMA Permit PER84775.|
Will not affect grasses, will severely damage clovers and other broadleaved plants, including surrounding trees, if contacted by the spray.
Soil-residual, hindering the re-establishment of clovers and other broadleaved plants for 6-12 months.
|100 - 130 ml/10 L||Suitable for use near waterways.|
Non-selective and will damage or kill trees and grasses that come into contact with spray drift.
Visible symptoms of treatment may take from 3-7 days to develop.
These products are not registered for this application method in Tasmania and will not be mentioned on product labels, however Permit Number - PER84775 issued by the Australian Pesticides & Veterinary Medicines Authority has been issued for this specific use. If using this method and herbicide you will require a copy of this off-label permit.
For further information on permit details visit the APVMA website at www.apvma.gov.au